| General parameters
|
| Base of wheels | 2512 |
| Track |
| Forward wheels | 1513 |
| Back wheels | 1495 |
| Minimum diameter of a turn, m | 10.9 |
| Steering
|
| Design | Reechnoye, with the hydraulic booster. A steering column – safety, telescopic, with inclination and length adjustment. |
| Power steering liquid | Oil for G 002 000 hydrosystems |
| Forward suspension bracket
|
| Design | Independent with MacPherson's racks, screw springs, hydraulic shock-absorbers and the stabilizer of cross-section stability |
| Convergence of forward wheels | 0 ° ± 10' (0 ± 1 mm) |
| Divergence at turn on 20 ° |
| Models with a normal suspension bracket | 1 ° 30' |
| Models with a sports suspension bracket | 1 ° 31' |
| Disorder of forward wheels – negative (is regulated) |
| Models with a normal suspension bracket | – 0 ° 30 '± 30' |
| Models with a sports suspension bracket | – 0 ° 33 '± 30' |
| Longitudinal inclination of an axis of turn of forward wheels |
| Models with a normal suspension bracket | 7 ° 40 '± 30' |
| Models with a sports suspension bracket | 7 ° 50 '± 30' |
| Difference between the parties | 0 ° 30' |
| Maximum angle of rotation of an internal wheel |
| Models with a normal suspension bracket | 38 ° 30' |
| Models with a sports suspension bracket | 38 ° 15' |
ATTENTION
Disorder of forward wheels can be changed by a way of shift of a beam of the power unit (work HUNDRED). Thus it is necessary to replace bolts of fastening of a beam of the power unit with the new.
|
| Back suspension bracket
|
| Design | Semi-independent, consisting of a cross-section beam and two longitudinal levers. There is a stabilizer of cross-section stability. Springs and gas-filled shock-absorbers are placed separately. All-wheel drive models are equipped with a suspension bracket with dual cross-section levers. |
| Disorder – negative (is not regulated) | – 1 ° 36 '± 20' |
| The maximum difference between the parties | 30' |
| The convergence (is not regulated) | + 0°25 '± 15' (2.77 ± 1.66 mm) |
| Efforts of a tightening of carving connections
|
The moments of an inhaling of fixture are given also in the text of Head and on some иллюстрациях*.
*vydelenny in the text a bold print the moments of an inhaling are subject to exact observance; the efforts not allocated with a bold print are given only roughly
|
| Suspension bracket of forward wheels
|
| Amortization rack above on a support | 60 N • m |
| Nut of the bottom fastening of an amortization rack | 60 N • m +90 °–120 ° |
| Stretcher bolts | 100 N • m +90 ° |
| The bottom cross-section lever on the bridge case | 70 N • m +90 ° |
| Collars of the stabilizer of cross-section stability | 25 N • m |
| Top nut of a rod of the piston of the shock-absorber | 60 N • m |
| Tightening bolt of a finger of a spherical support | 45 N • m |
| Spherical support to the lever | 20 N • m +90 ° |
| Tips of steering drafts | 45 N • m |
| Nuts of naves (wheels are lifted over the earth) |
| 1–й reception | 300 N • m |
| 2–й reception | to release |
| 3–й reception | 50 N • m |
| 4–й reception | 30 ° |
| Suspension bracket of back wheels
|
| Front-wheel models |
| The shock-absorber on the bridge | 60 N • m |
| The shock-absorber on a body | 75 N • m |
| Top nut of a rod of the piston of the shock-absorber | 25 N • m |
| Axial bolt of fastening of the bridge on a body | 80 N • m |
| Arm of fastening of the bridge on a body (4 bolts) | 75 N • m |
| Mudguard of the brake mechanism on the bridge | 60 N • m |
| Nut of the wheel bearing | 175 N • m |
| Steering
|
| Nut of a steering wheel | 50 N • m |
| Tightening nut of a finger of the hinge of steering draft | 45 N • m |
| Bar of adjustment of a convergence | 75 N • m (do not turn on) |
| Lock-nut of steering draft | 50 N • m |
| Hollow bolt of a returnable hose | 45 N • m |
| Hollow bolt of a flexible (submitting) hose | 40 N • m |
Pump of the amplifier of a steering
on the console | 25 N • m |
| Nuts of wheels | 120 N • m |
