Audi A3

since 1997 of release

Repair and car operation



Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
- Manual box of gear shifting
   Removal and RKPP installation
   Gear shifting drive
   Removal and installation of the case of the mechanism of a choice of transfers
   Adjustment of a drive of switching
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Elektroskhema







Gear shifting drive

GENERAL INFORMATION

Traction drive of gear shifting. Engines of 1.6 l

And – drafts of switching
In – draft of a choice of transfer
Arrow A transfer switching
Arrow In moving of a choice of transfer

Hummock drive of gear shifting. Engines of 1.8 l

And – drafts of switching
In – draft of a choice of transfer
With – the heat-shielding screen of system of release
Acts in film before removal of a drive of switching
1–gear shifting lever
2–the directing lever with a capture/cable
Arrow A transfer switching
Arrow In moving of a choice of transfer

At inclusion of transfer it is necessary to do distinction between cross-section moving (a choice passes) the switching lever in neutral situation and actually transfer switching. Both movings at the car with the engine of 1.6 l are transferred to RKPP through drafts.

Models with engines of 1.8 l for transfer of movings of the lever of gear shiftings instead of drafts have two cables.
After removal of RKPP or dismantling of a drive of its switching it is necessary to adjust again.
ATTENTION

All support and surfaces of a friction to grease with A2 AUDI G 052 142 greasing.
All support and surfaces of a friction to grease with A2 AUDI G 052 142 greasing.