Audi A3

since 1997 of release

Repair and car operation



Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
- Systems of cooling, heating
   + System of cooling of the engine
   - Systems of ventilation, heating and air conditioning
      General information and security measures
      Removal and installation of air deflectors
      Removal and installation of a nozzle of the region of feet
      Removal and drive installation lamp heater/replacement
      Removal and installation of cables of a drive of management of a heater
      Removal and installation of the fan of fresh air
      Removal and installation of the additional resistor
      Conditioner
      Removal and compressor installation
      Conditioner diagnostics on codes on the display of the block of its management
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Elektroskhema







Removal and installation of a nozzle of the region of feet

REMOVAL

PERFORMANCE ORDER
1. Remove the shelf from the driver, address to the subsection Removal and pocket installation from outside водител.
2. Disconnect a rack (And) the central console.
3. Take out connecting elements between a nozzle of the region of feet and the channel of a heater of a back part of salon (In).
4. Unscrew fastening bolts (C).
5. Take out a nozzle (D) in the direction of the party of the driver (shooter).

INSTALLATION

Installation is carried out in sequence, return to removal.