Audi A3

since 1997 of release

Repair and car operation


Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
- Systems of cooling, heating
   + System of cooling of the engine
   - Systems of ventilation, heating and air conditioning
      General information and security measures
      Removal and installation of air deflectors
      Removal and installation of a nozzle of the region of feet
      Removal and drive installation lamp heater/replacement
      Removal and installation of cables of a drive of management of a heater
      Removal and installation of the fan of fresh air
      Removal and installation of the additional resistor
      Conditioner
      Removal and compressor installation
      Conditioner diagnostics on codes on the display of the block of its management
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Elektroskhema

38a8de3e

Removal and installation of the fan of fresh air

REMOVAL

PERFORMANCE ORDER
1. Remove a ware box, address to the subsection Removal and installation of a ware box.
2. Remove the additional resistor, address to the subsection Removal and installation of the additional resistor.
3. Disconnect the tip (And) from the fan (In). Take out the fan down from a heater (the shooter on an illustration).
4. If necessary unscrew 2 bolts of fastening of the electric motor of the fan to a basis plate.
INSTALLATION
5. Insert the fan into a heater.
6. Fix the tip (And).
7. Establish the additional resistor, address to the subsection Removal and installation of the additional resistor.
8. Establish a ware box, address to the subsection Removal and installation of a ware box.