Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
+ Forward suspension bracket
+ Back suspension bracket
- Steering
Removal and installation of the block of a safety cushion
Removal and installation of a steering wheel
Removal and installation helmsman of a draft/tip of steering draft
Removal and installation of the pump of the power steering
Corners of installation of forward wheels
+ Body
+ Onboard electric equipment
+ Elektroskhema
|
Removal and installation of a steering wheel
REMOVAL
ATTENTION
Before block removal a safety cushion surely take the appropriate measures of safety.
|
PERFORMANCE ORDER
|
| 1. Remove the safety cushion block, address to the subsection Removal and installation of the block of a safety cushion. |
| 2. Establish wheels directly, a steering wheel in the central situation. |
| 3. Mark paint or a chertilka the provision of a steering wheel in relation to a steering shaft. |
|
4. Disconnect a steering wheel – 1–and remove it from a steering shaft. |
| 5. Do not change the provision of a steering column (the direct provision of wheels). |
| |
|
INSTALLATION
|
PERFORMANCE ORDER
|
1. Put on a steering wheel shlitsevy connection of a shaft so that coincided put before marking.
ATTENTION
At installation of a steering wheel steering wheels should stand directly, and the switch of signals of turn should occupy average situation.
|
| 2. Fix on a carving a steering wheel. Tighten the screw with internal teeths – 2 – the moment of 60 N • m. If there is a six-sided screw – 1–, tighten it the moment of 75 N • m. |
| 3. Establish into place the safety cushion block, address to the subsection Removal and installation of the block of a safety cushion. |
| 4. Pass on the car and check at rectilinear movement the provision of a steering wheel. Spokes of a steering wheel should be in horizontal situation. |
| 5. If the steering wheel costs slantwise, remove it and rearrange. If necessary check a track of forward wheels (work HUNDRED). |
| 6. Check a sound signal and a reset of the switch of signals of turn. |
|
|
|
