Audi A3

since 1997 of release

Repair and car operation



Audi A3
+ Maintenance instruction
- Current leaving and service
   Schedule of routine maintenance
   General information on control
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them
   Replacement of impellent oil and oil filter
   Check of a gear belt of a drive of GRM on existence of damages, wear measurement
   Check of brake system
   Check of fuel system
   Rotation and replacement of wheels. Antisliding chains
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of functioning of system of cooling
   Check of a condition of system of production of the fulfilled gases
   Visual check of tightness of a box of gear shifting
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Greasing of clamps of doors and lock cylinder
   Condition check, adjustment and replacement of brushes of screen wipers
   Visual control of a seat belt and safety cushion block
   Check of a condition of the battery, care of it and charging
   Check of level of the RKPP transmission oil
   Replacement of the filter of air of salon
   Replacement of a filtering element of the air filter
   Replacement of brake liquid
   Check and replacement of spark plugs
   Replacement of the fuel filter of the diesel engine
   Check of level of liquid of system of hydrostrengthening of a wheel
   Check of level of liquid of the main transfer of automatic transmission
   Oil replacement in coupling of Haldex of models with a full drive
   Check of a condition of driving ridge belts
   Check of level of the AT transmission liquid
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Elektroskhema


38a8de3e

Check of a condition of system of production of the fulfilled gases

GENERAL INFORMATION

Examine rubber подвесы systems of production of the fulfilled gases on existence of cracks

PERFORMANCE ORDER
1. Check should be made at the cold engine therefore it is better to be engaged in it before the first trip for the present day or not earlier than in three hours after engine switching off. Check a condition twist release systems, beginning from the engine and finishing a cut of an exhaust pipe. In an ideal this check should be carried out at the car lifted on the winch when from below to it there is a free access. If the winch is inaccessible, поддомкратьте the car and reliably establish it on support.
2. Check pipes and trumpet connections on existence of signs of leaks, strong corrosion and damages. Check a condition and reliability of fastening of all brackets and подвесов systems.
3. At the same time examine the car bottom on existence of holes, the corrosion, the dispersed seams and the other defects allowing penetration of fulfilled gases in salon of the car. Close up all openings suitable hermetic.
4. Release system, especially its support and подвесы, often are a source of a roar and other unpleasant sounds. Shake and pull pipes, exhaust silencers and the catalytic converter (if it is provided). If these components adjoin to elements of a body or suspension bracket details, replace fixture of system of release.
5. Survey of an internal surface of an exhaust pipe allows to define the current working state of the engine. The structure of deposits in a pipe speaks about quality of settings of the engine. If the pipe from within black and smoked, it can indicate that it is necessary to check fuel system carefully.