Audi A3

since 1997 of release

Repair and car operation



Audi A3
+ Maintenance instruction
- Current leaving and service
   Schedule of routine maintenance
   General information on control
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them
   Replacement of impellent oil and oil filter
   Check of a gear belt of a drive of GRM on existence of damages, wear measurement
   Check of brake system
   Check of fuel system
   Rotation and replacement of wheels. Antisliding chains
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of functioning of system of cooling
   Check of a condition of system of production of the fulfilled gases
   Visual check of tightness of a box of gear shifting
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Greasing of clamps of doors and lock cylinder
   Condition check, adjustment and replacement of brushes of screen wipers
   Visual control of a seat belt and safety cushion block
   Check of a condition of the battery, care of it and charging
   Check of level of the RKPP transmission oil
   Replacement of the filter of air of salon
   Replacement of a filtering element of the air filter
   Replacement of brake liquid
   Check and replacement of spark plugs
   Replacement of the fuel filter of the diesel engine
   Check of level of liquid of system of hydrostrengthening of a wheel
   Check of level of liquid of the main transfer of automatic transmission
   Oil replacement in coupling of Haldex of models with a full drive
   Check of a condition of driving ridge belts
   Check of level of the AT transmission liquid
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Elektroskhema


38a8de3e

Check of a condition of protective covers of power shafts

PERFORMANCE ORDER
1. Protective covers of power shafts are very important elements since they protect hinges of equal angular speeds (CV JOINT) from hit on them of dirt, water and other extraneous subjects causing damages. External pollution of protective covers by oil and greasings can lead to premature failure of a material of covers therefore it is recommended to wash periodically covers with water with soap.
2. Examine covers on existence of gaps and cracks, and also the weakened collars. In case of detection of signs of cracks or leakage of greasing the cover should be replaced.
3. At the same time check the general condition of hinges of equal angular speeds, holding a shaft and at the same time trying to turn a wheel. Repeat attempt, holding the internal hinge of equal angular speeds and turning a shaft. Any appreciable люфт points to wear of the hinge, wear in grooves of a shaft or an otvorachivaniye of a lock nut of a shaft.