Audi A3

since 1997 of release

Repair and car operation



Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Electric equipment of system of comfort
   Diagnostics of malfunctions of onboard electric equipment - the general information
   Check of the electric motor of a screen wiper
   Check of warmed back glass
   Stoplight check
   Removal, installation and check of a sound signal
   Safety locks
   Fusible inserts - the general information
   Chain breakers (thermal relays)
   Relay
   Replacement of batteries of a key of remote control
   Replacement of a battery/lamp of a natural with illumination
   Anticreeping blocking
   Lighting devices
   Replacement of lamps of external lighting
   Replacement of bulbs of internal lighting
   Removal and headlight installation
   Removal and installation of the electric motor of adjustment of range of light
   Removal and installation of the forward index of turn
   Removal and installation of a back lamp
   Adjustment of light of headlights
   Devices
   Removal and installation of a control panel
   Removal and installation of the podrulevy switch
   Removal and installation of switches and lamps
   Removal, installation and radio receiver coding
   Input of a code of a radio receiver
   Removal and loudspeaker installation
   Removal and installation of the aerial of a roof
   Additional installation of a radio telephone on in a special way prepared models
   Removal and installation of the electric motor of a forward screen wiper
   Removal and installation of the lever and electric motor of a back screen wiper
   Removal and installation of a cleaner of back glass
   Removal and tank installation with the pump of a stekloomyvatel
   Elements темпостата
+ Elektroskhema







Replacement of bulbs of internal lighting

Lamp internal publicizing/illumination of reading

PERFORMANCE ORDER
1. Carefully remove fingers in front a rasseivatel of the lamp consisting of three parts.
2. Take out from the boss defective spotlights and replace it. Thus watch the reliable provision of a lamp, if necessary turn in contacts.
3. Take out a defective lamp of illumination of reading and replace.
ATTENTION

If the new lamp is not inserted into a cartridge, remove the case. For this purpose unscrew screws of fastening of the case a screw-driver with a crosswise tip. On a reverse side of the case turn a cartridge of a lamp of illumination on 90 ° (1/4 turns) to the right and take out. Insert into a cartridge a new lamp. Insert a cartridge into the case and fix, having turned to the left. Fix the lamp case.


4. Insert a rasseivatel and fix it.

Lamp of illumination of a prophetic box


PERFORMANCE ORDER
1. Open a ware box.
2. Insert a narrow screw-driver into a groove of the lamp and carefully take out a lamp.
3. Compress a clamp of the tip and remove a lamp.
4. Take out the damaged sofitny lamp from the boss and replace. Thus watch reliability of fixing of a lamp, if necessary turn in contact clips.
5. Turn in the deformed spring of the case of a lamp in outer side of the case.
6. Join the socket and fix it.
7. Insert a lamp into an opening.
8. Close a ware box.

Lamp of illumination of a back part of salon


PERFORMANCE ORDER
1. Insert a flat screw-driver sideways behind a lamp and press a stopper–1–on a salon ceiling (an arrow on an illustration). Second option: press fingers on a lamp from the switch, having compressed a spring–1–, and take out it from the switch.
2. Remove the lamp.
3. Rasstykuyte I will corrode – 3–.
4. Take out from the boss the damaged lamp spotlights–4–and replace it. Thus watch reliability of fastening of a lamp, if necessary turn in contact clips.
5. If it is necessary, turn in a lock spring in the direction of outer side of the case.
6. Join and fix the socket.
7. Insert at first the lamp both hooks–2–into an opening in a salon ceiling. On the other hand press and fix a lamp (shooter).

Lamp of illumination of a luggage carrier


From the right and left side of a luggage carrier in боковинах are located on one lamp of illumination of a luggage carrier.

PERFORMANCE ORDER
1. Insert a flat screw-driver behind into a groove on a rasseivatel. For protection against damages put a rag between a screw-driver and facing.
2. Carefully remove the lamp.
3. Rasstykuyte I will corrode.
4. Take out from the boss the damaged sofitny lamp and replace it. Watch reliability of fastening of a lamp, if necessary turn in contact clips.
5. If it is necessary, turn in a lock spring in the direction of outer side of the case.
6. Join and fix the socket.
7. Insert a lamp of illumination of a luggage carrier electric connections at first into an opening боковины and then press on the other hand.