Audi A3

since 1997 of release

Repair and car operation



Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Electric equipment of system of comfort
   Diagnostics of malfunctions of onboard electric equipment - the general information
   Check of the electric motor of a screen wiper
   Check of warmed back glass
   Stoplight check
   Removal, installation and check of a sound signal
   Safety locks
   Fusible inserts - the general information
   Chain breakers (thermal relays)
   Relay
   Replacement of batteries of a key of remote control
   Replacement of a battery/lamp of a natural with illumination
   Anticreeping blocking
   Lighting devices
   Replacement of lamps of external lighting
   Replacement of bulbs of internal lighting
   Removal and headlight installation
   Removal and installation of the electric motor of adjustment of range of light
   Removal and installation of the forward index of turn
   Removal and installation of a back lamp
   Adjustment of light of headlights
   Devices
   Removal and installation of a control panel
   Removal and installation of the podrulevy switch
   Removal and installation of switches and lamps
   Removal, installation and radio receiver coding
   Input of a code of a radio receiver
   Removal and loudspeaker installation
   Removal and installation of the aerial of a roof
   Additional installation of a radio telephone on in a special way prepared models
   Removal and installation of the electric motor of a forward screen wiper
   Removal and installation of the lever and electric motor of a back screen wiper
   Removal and installation of a cleaner of back glass
   Removal and tank installation with the pump of a stekloomyvatel
   Elements темпостата
+ Elektroskhema







Removal and installation of switches and lamps

Switch/regulator of range of light

PERFORMANCE ORDER
1. Press the switch of light–1–and at the same time turn it on the left–2–.
2. Hold the switch in this situation and take out the case of the switch of light from the dashboard-3-.
3. Rasstykuyte I will corrode at the switch.
4. Raise a flat screw-driver or a plastic wedge lateral stoppers (arrows on an illustration) at a regulator–1–and thus release stoppers.
5. Take out a regulator–1–back from the case of the switch of light.
6. Insert a regulator in directing on the switch of light–2–and press into the case of the switch of light.
7. Join the socket.
8. For installation press the switch of light–1–and at the same time turn it to the right–2–. Thus both lock hooks are pressed.
9. In this situation press light switch into an opening of the dashboard-3-and fix.

The switch in the central console


PERFORMANCE ORDER
1. Remove a radio receiver, address to the subsection Removal, installation and radio receiver coding.
2. Open an ashtray and take out an insert.
3. Turn out the screw with a crosswise shliyets – 1–and remove an ashtray–2–.
4. Rasstykuyte I will corrode lamps of illumination of an ashtray and the lighter.
5. Turn out 2 screws with a crosswise shliyets (shooters on an illustration).
6. Turn out 2 screws with a crosswise shliyets (shooters on an illustration) in a radio receiver aperture.
7. Carefully remove up facing–1–.
8. Press a hand forward the corresponding switch behind through a radio receiver aperture. Thus at the same time carefully a small screw-driver press brackets between the switch and the central console.
9. In the conclusion completely take out the switch and расстыкуйте I will corrode.
10. Installation is carried out in sequence, return to removal.

Switch of a lamp of illumination of a ware box


PERFORMANCE ORDER
1. Carefully wring out a lateral cover of the dashboard on the party of the forward passenger.
2. Rasstykuyte shtekerny connections–1–also remove cable tips–2–.
3. Put forward the switch–3–of the holder of the dashboard in the arrow direction.
4. Installation is carried out in sequence, return to removal.

Switch of the window regulator/mechanism of adjustment of a mirror


PERFORMANCE ORDER
1. Remove door facing, address to the subsection Removal and installation of facing of a door.
2. Carefully separate on a reverse side of facing an insulating mat.
3. Rasstykuyte I will corrode the switch of a window regulator–3–and/or the mechanism of adjustment of a mirror–1–.
4. Take out from door facing the switch-1-. For this purpose open stoppers–2–.
5. Installation is carried out in sequence, return to removal.

Switch of the movable panel of the hatch / internal lamp

The regulator of the movable panel cannot be replaced separately. In the presence of malfunctions it is necessary to replace knot of management and the internal lamp in a set.

PERFORMANCE ORDER
1. Extend fingers a rasseivatel–1–forward and disconnect it behind.
2. Unscrew screws of fastening–2–and remove the switch of the movable panel / the internal lamp-3-.
3. Compress a screw-driver hooks (In) and extend forward the switch of the movable panel, disconnect it behind (And).
4. Rasstykuyte shtekerny connections–4–and–5–. 6–a lamp of illumination of reading, 7 – a lamp of the internal lamp.
5. Join shtekerny connections at the switch of the movable panel / the internal lamp.
6. Fix the switch of the movable panel / the internal lamp in situation (And) and (In) and fix.
7. Fix the switch / the internal lamp two screws.
8. Fix behind a rasseivatel and insert in front into an opening.