Audi A3

since 1997 of release

Repair and car operation



Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Electric equipment of system of comfort
   Diagnostics of malfunctions of onboard electric equipment - the general information
   Check of the electric motor of a screen wiper
   Check of warmed back glass
   Stoplight check
   Removal, installation and check of a sound signal
   Safety locks
   Fusible inserts - the general information
   Chain breakers (thermal relays)
   Relay
   Replacement of batteries of a key of remote control
   Replacement of a battery/lamp of a natural with illumination
   Anticreeping blocking
   Lighting devices
   Replacement of lamps of external lighting
   Replacement of bulbs of internal lighting
   Removal and headlight installation
   Removal and installation of the electric motor of adjustment of range of light
   Removal and installation of the forward index of turn
   Removal and installation of a back lamp
   Adjustment of light of headlights
   Devices
   Removal and installation of a control panel
   Removal and installation of the podrulevy switch
   Removal and installation of switches and lamps
   Removal, installation and radio receiver coding
   Input of a code of a radio receiver
   Removal and loudspeaker installation
   Removal and installation of the aerial of a roof
   Additional installation of a radio telephone on in a special way prepared models
   Removal and installation of the electric motor of a forward screen wiper
   Removal and installation of the lever and electric motor of a back screen wiper
   Removal and installation of a cleaner of back glass
   Removal and tank installation with the pump of a stekloomyvatel
   Elements темпостата
+ Elektroskhema







Removal and installation of the electric motor of a forward screen wiper

REMOVAL

PERFORMANCE ORDER
1. Remove cleaner levers, address to the subsection Removal and installation, check and adjustment of final position of levers of a screen wiper.
2. Remove windscreen heating, address to the subsection Removal and installation snuffled a windscreen washer.
3. Rasstykuyte I will corrode the cleaner electric motor.
4. Turn out 3 screws of fastening (a key of 10 mm)–1–.
5. Carefully cast away ahead a frame of a cleaner of-2-(shooters) and then in a set take out to the left from a water modular compartment.
6. Disconnect draft–3–from the spherical hinge (the shooter on an illustration).

ATTENTION

Nut (key of 10 mm) at a crank of the electric motor it is not necessary to turn on.


7. Unscrew 3 screws-2-(a key «10») at the holder of the electric motor of a cleaner.
8. Remove the electric motor-1-from the holder.

INSTALLATION

PERFORMANCE ORDER
1. Fix the electric motor-1-with a crank to the holder–2–.
2. Draft–3–establish in extreme situation. Thus points (and) should lie on one line.
3. In this situation put on draft a head of the hinge (shooter).
4. Join the socket at the cleaner electric motor.
5. Previously enter a frame with the electric motor into a water modular compartment.
6. Cast away a cleaner frame forward and fix the moment of 8 N • m.
7. Establish windscreen heating, address to the subsection Removal and installation snuffled a windscreen washer.
8. Establish levers, address to the subsection Removal and installation, check and adjustment of final position of levers of a screen wiper.
9. Attach a weight cable (–) the storage battery.
ATTENTION

Make active automatic equipment of an electric window regulator, and also establish hours and enter a radio tape recorder code, address to subsection Input of a code of a radio receiver.