Audi A3

since 1997 of release

Repair and car operation



Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Electric equipment of system of comfort
   Diagnostics of malfunctions of onboard electric equipment - the general information
   Check of the electric motor of a screen wiper
   Check of warmed back glass
   Stoplight check
   Removal, installation and check of a sound signal
   Safety locks
   Fusible inserts - the general information
   Chain breakers (thermal relays)
   Relay
   Replacement of batteries of a key of remote control
   Replacement of a battery/lamp of a natural with illumination
   Anticreeping blocking
   Lighting devices
   Replacement of lamps of external lighting
   Replacement of bulbs of internal lighting
   Removal and headlight installation
   Removal and installation of the electric motor of adjustment of range of light
   Removal and installation of the forward index of turn
   Removal and installation of a back lamp
   Adjustment of light of headlights
   Devices
   Removal and installation of a control panel
   Removal and installation of the podrulevy switch
   Removal and installation of switches and lamps
   Removal, installation and radio receiver coding
   Input of a code of a radio receiver
   Removal and loudspeaker installation
   Removal and installation of the aerial of a roof
   Additional installation of a radio telephone on in a special way prepared models
   Removal and installation of the electric motor of a forward screen wiper
   Removal and installation of the lever and electric motor of a back screen wiper
   Removal and installation of a cleaner of back glass
   Removal and tank installation with the pump of a stekloomyvatel
   Elements темпостата
+ Elektroskhema







Removal and installation of the lever and electric motor of a back screen wiper

GENERAL INFORMATION

Lever of a back screen wiper

1–brush
2–cap
3–nut, 16 N • m
4–spring washer
5–cleaner lever
6–nozzle
7–power shaft of the electric motor
8–brush rubber

Electric motor of a back cleaner

1–electric motor
2–sealing rubber
3–an opening in back glass
4–nozzle
5–power shaft of a back cleaner
6–connecting tube
7–socket
8–nuts, 3 pieces, key of 10 mm
9–water hose
10-electric motor cover

Lever of a back screen wiper

REMOVAL

PERFORMANCE ORDER
1. Carefully hook a small screw-driver and remove a cap–2–.
2. Unscrew a nut–3–and remove together with a spring washer–4–.
3. Remove the lever-6-from an electric motor-7-shaft.

INSTALLATION

PERFORMANCE ORDER
1. Switch off the switch of the electric motor of a screen wiper.
2. Establish the lever so that rubber-8-was at distance of 5 mm from ceramics.
3. Tighten the lever the moment of 8 N • m also put on a cap.
4. Include a cleaner of back glass, if necessary rearrange it.

Electric motor of a back cleaner

REMOVAL

PERFORMANCE ORDER
1. Remove the lever.
2. Remove internal facing of a door of a back, address to the subsection Removal and installation of facing of a door of a back.
3. Rasstykuyte I will corrode – 7–.
4. Carefully remove a hose for water-9-from a connecting tube–6–.
5. Unscrew nuts–8–and remove the electric motor of a cleaner–1–.

INSTALLATION

PERFORMANCE ORDER
1. Carefully insert sealing rubber-2-into an opening of back glass-3-.
2. Carefully insert the electric motor into sealing rubber-2-and press it the moment of 8 N • m to a finger.
3. Further installation is made in sequence, return to removal.