Audi A3

since 1997 of release

Repair and car operation



Audi A3
- Maintenance instruction
   Audi A3/S3 brand cars - the summary
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and workplace equipment
   Poddomkrachivaniye and towage
   Engine start from the auxiliary power supply
   Checks of readiness of the car to operation
   Automobile himikaliya
   Diagnostics of malfunctions of knots and car systems
   Governing bodies and receptions of safe operation
   Arrangement of governing bodies and devices
   Keys, body locks with uniform management and the security alarm system
   Electric window regulators and rear-view mirrors
   Safety systems. Transportation of children
   Seats
   Luggage carrier
   Adjustable steering column
   Hand brake
   Automatic transmission
   The device of the acoustic help at a parking
   Lock of ignition and engine start
   Control and measuring devices. Precautionary and diagnostic systems
   Traveling computer
   Switches and switches
   Tempostat
   Screen wipers and stekloomyvatel
   Ventilation, heater and conditioner of air of salon
   Elevating and movable panel крыши*
   Illumination of salon and luggage carrier
   Salon equipment
   Luggage carrier on a roof
   Running in
   Features of driving of the car and auxiliary systems (ABS, EDS, ASR, ESP)
   Trailer operation
   Fuelling and emergency unlocking of a cover of the refueling hatch
   Cowl
   Readjustment of headlights
   First-aid kit
   Sign of an emergency stop
   Set of the tool and jack
   Spare wheel
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Elektroskhema







Control and measuring devices. Precautionary and diagnostic systems

GENERAL INFORMATION

Control panel

1–a tachometer and a digital watch with date indication
2–control lamps
3–button of control of hours / control button
4–temperature of cooling liquid
5–index of a stock of fuel
6–display
– indication of periodicity of maintenance
– alarm symbols
– external temperature
– positions of the lever селектора*
– information system водителя*
7–dumping button
run measuring instrument
indications of periodicity of maintenance
8–a speedometer with the display panel
counter of the general run
run measuring instrument

1 tachometers and digital watch with date indication


Tachometer

The red sector of a scale corresponds to a range of the maximum turns, admissible is short-term for the rolled and heated-up engine.

It is recommended, however, the latest at achievement by an arrow of this sector of a scale to be switched to an overgear or to reduce gas.

In a running in avoid high-speed modes.

Digital watch with date indication


The display panel of hours is in limits of a scale of a tachometer.

The top indication shows time, and bottom date.

The button of control establishes time and date. Hours can work as radio-controlled quartz *, and as a usual quartz watch.

At reception of important radio information hours are included automatically into a mode “a radio-controlled quartz watch” with emergence on the display panel of a symbol of reception of radio information (radio tower). In the absence of important radio information within three days hours are automatically switched in the quartz watch mode. Indication of a symbol of reception of radio information thus disappears.

Installation of time of hours / date

Manually it is possible to establish time and date only in the quartz watch mode.

For installation of the current hour
pull the button, hour indication yet will not start to blink. Indication of hour changes button turn to the left / to the right.

For installation of minutes
pull the button several times, indication of minutes yet will not start to blink. Indication of minutes changes button turn to the left / to the right.

For installation
of calendar date pull the button several times, indication of day, month or year yet will not start to blink. Indication of day, month or year changes button turn to the left / to the right.

The termination of a blinking of indication after an otpuskaniye of the button means completion of process of installation.

Installation of the time zone

When moving on the car to other time zone respectively change indication of hours.

For installation of the time zone (in a mode радиочасов) pull the button, hour indication yet will not start to blink. Indication of the time zone (the current hour) changes button turn to the left / to the right.

Conclusion to indication of calendar date

Pull the button several times, indication of calendar date yet will not start to blink.

Calendar date is deduced on indication by button turn to the right and disappears at button turn to the left. The termination of a blinking of indication after an otpuskaniye of the button means completion of process of installation.

2 control lamps

Address to the description below.

3 button of control of hours / control button


The control button has the following appointment:

Call of indication of the remained number of kilometers before maintenance
The short-term pressing of the button at the included ignition on indication deduces number of the kilometers which have remained before maintenance. Check of work of system can be carried out both at muffled, and at the working engine and at speed no more than 5 km/h.

For more detailed data address to the description below.

Control of indication of symbols

The double pressing of the control button at the included ignition makes a consecutive call on indication of all symbols. Check of work of system can be carried out both at muffled, and at the working engine and at speed no more than 5 km/h.

In the presence of malfunction of the 1st degree of priority (a red symbol) control of indication is impossible.

Conclusion to indication of instructions водителю1)

At a blinking of any symbol of the 1st degree of priority, as the help to the driver on the display the corresponding instructions can be deduced.
For example: “MOTOR ABSTELLEN, ЦLSTAND PRЬFEN” (muffle the engine, check oil level).

1) Only cars with information system of the driver.

For highlighting press the control button. Indication dies away approximately in 5 seconds after a button otpuskaniye.

Illumination of counters of run and hours

At the switched-off ignition press the control button – approximately within 15 seconds counters of run and hours are shined.

Besides, lighting joins and burns within 30 seconds after opening of a door of the driver.

Button of control of hours


Address to the description below.

4 temperature of cooling liquid

The index works at the included ignition.

Interval of temperatures of the cold engine

While the arrow is in the left part of a scale, avoid the raised turns and engine loading!

Working interval of temperatures

At a normal mode of movement of the shooter of the index of temperature should hesitate within an average part of a scale!

At considerable loading of the engine and high temperature of external air of the shooter can depart and further to the right on a scale. It should not become a reason for alarm, the alarm lamp of system of cooling does not blink yet.

Alarm lamp

The blinking of an alarm lamp of temperature / level of cooling liquid during movement testifies to falling of its level or an overheat

Stop, muffle the engine and establish the reason of malfunctions.

5 reserved fuels

The index works at the included ignition.

Capacity of a fuel tank of front-wheel cars makes 55 liters, and all-wheel drive 62 liters.
If the arrow reached a reserve field, in a stock there were about 7 liters of fuel.

Fire of a symbol of a gas station on a control panel reminds, besides, of need of filling.
Never develop fuel from a tank up to the end.


ATTENTION

For receiving authentic indication of availability of fuel include ignition during filling.


6 display

– indications of periodicity of maintenance;
– alarm symbols;
– external temperature;
– positions of the lever of the selector – address to subsection Automatic transmission;
– information system водителя*

7 button of dumping

– measuring instrument of run,
– indications of periodicity of maintenance

8 speedometer with run counters

Speedometer


The speedometer is equipped with the digital counter of the general run and a run measuring instrument from the moment of dumping.

In a running in and further adhere given in subsection the Running in of instructions on driving.

Run counters

The bottom counter registers the general run, and top (measuring instrument) – run from the moment of the measurement beginning.

Accuracy of counting of a measuring instrument of run makes 100 m.

Button of dumping of a measuring instrument of run


Press the button before installation of zero value of a measuring instrument of run.

Indication of periodicity of maintenance


On an illustration the display of a control panel with indication of the run which has remained before carrying out servicing is represented.

Indication of the run which has remained before carrying out maintenance

The short-term pressing of the control button (1) at the included ignition on indication deduces number of the kilometers which have remained before maintenance. Check of work of system can be carried out both at muffled, and at the working engine and at speed no more than 5 km/h.

Indication of the quantity which have remained before maintenance of kilometers is updated each 500 km of run.
On the display of the new car, and also after carrying out maintenance, throughout the first 500 km of run “SERVICE IN 15000 KM” indication is always deduced.

It belongs also to cars with “Longlife” maintenance.

In the presence of malfunction of the 1st degree of priority (a red symbol) the call of indication of the quantity which have remained before maintenance of kilometers is impossible.

At approach / approach of term of passing of the next maintenance, after ignition inclusion on the display indication of "SERVICE IN 2000 KM" or “is deduced by SERVICE!”. 5 seconds later the display is switched to a normal mode of indication.

Sbrasyvaniye of indication of periodicity of maintenance

Sbrasyvaniye of indication is carried out on carrying out maintenance HUNDRED Audis.

Independently to dump indication it is possible as follows:

Switch off ignition.
At the pressed button (2) include ignition. On the display there is an indication “SERVICE!”
ATTENTION

Dump indication in a starting position only according to intervals of carrying out maintenance. Otherwise it will not represent the facts.
At an accumulator detachment these indications of maintenance remain.


Display of faults

In the presence of malfunction on a place of indications of a measuring instrument of run of a control panel there is “dEF” indication. Malfunction urgently eliminate on HUNDRED Audis.

Control lamps

Electronic control of capacity двигателя*1) ERS

(Electronic Power Control)

The control lamp lights up at ignition inclusion. In the absence of malfunction it should go out after engine start.

1) Control lamp of system of preheat of the diesel engine

The control lamp lights up at emergence during malfunction movement in a control system of the engine. The control system of engine capacity is automatically switched to the emergency program. Thus engine capacity a little decreases. Urgently address on HUNDRED Audis.

Preheat system (only diesel engines)

At inclusion of ignition of the cold engine the control lamp lights up. Fire of a lamp testifies to inclusion of preheat of the engine.

The lamp dies away after achievement of temperature of ignition. The engine get at once as soon as the lamp will go out – address to subsection the Lock of ignition and engine start.

At start of the heated-up engine, and also at external temperature above +8°С the control lamp of system of preheat lights up approximately for one second – the engine can be got at once.

If at the cold engine the control lamp does not light up, malfunction in preheat system can be the reason. In this case address for the qualified help.

At malfunction emergence in a control system of the engine during movement the control lamp starts to blink. Engine management is switched automatically to the emergency program. Thus its capacity a little decreases.
Urgently address on HUNDRED Audis.

Turn indexes on прицепе*

At movement with the trailer control лампа* blinks synchronously with the included indexes of turn.

At malfunction of a lamp of the index of turn on the car or the trailer the control lamp does not blink.

Parking light / light of headlights

The control lamp burns at included lay fires and headlights.

Antiprobuksovochny system (ASR) *1)

The control lamp lights up at inclusion of ignition and should go out approximately in two seconds.

The lamp blinks during movement at ASR work.

At the switched-off device or in the presence of malfunction the control lamp burns constantly.

As the ASR system works together with ABS, at refusal of ABS also control lamp of ASR burns.

For more detailed data address to subsection Switches and switches.

1) A control lamp of ESP on cars with the electronic program of stability.

Electronic program of stability (ESP)

The control lamp lights up at inclusion of ignition and should go out approximately in 2 seconds.

The lamp blinks during movement at ESP work.

At the switched-off device or in the presence of malfunction the control lamp burns constantly.

As ESP works together with ABS, at refusal of ABS also control lamp of ESP burns.


ATTENTION

At fire of a control lamp right after start of the engine there can be a protective shutdown of ESP caused by system.
In this case you can include ESP switching off and the subsequent inclusion of ignition. The control lamp dies away and the device is completely ready for operation.
For more detailed data address to subsection Switches and switches.


Electronic anticreeping blocking


At inclusion of ignition the request of data of a key of the car is carried out. The positive result of data exchange proves to be true short fire of a control lamp.

When using not coded key (for example, the duplicate) a control lamp begins is long to blink. In this case start of the engine of the car is impossible. Address also to subsection Keys, body locks with uniform management
and security alarm system
.

Driving beam


The control lamp lights up at inclusion of a driving beam or when using a light signal – address to subsection Switches and switches.

Turn indexes



The control lamp blinks synchronously with the included indexes of turn. At refusal of one of turn indexes the control lamp blinks twice more often. Told does not treat movement with the trailer.

For more detailed data address to subsection Switches and switches.

At the switched-on alarm light system both control lamps of indexes of turn synchronously blink.

Electronics двигателя*


The control lamp signals about malfunction of electronics of the engine. Urgently address on HUNDRED Audis and eliminate a cause of defect.

System of safety cushions of AIRBAG

The control lamp of system of pillows and devices of a pyrotechnic tension of belts should light up after inclusion of ignition and die away in some seconds.

At the disconnected pillow of the forward passenger the control lamp burns in the beginning continuously 4 seconds, then 15 seconds then dies away blink. Thereby the signal about shutdown of a pillow of the forward passenger is given, address also to subsection of System of safety. Transportation of children.

The system is faulty, if a control lamp:

· does not light up at inclusion of ignition,
· does not die away after inclusion of ignition or
· lights up during movement.

About malfunction continuous burning of a control lamp signals.
ATTENTION

In case of malfunction of system check it at the first possibility on HUNDRED Audis. Otherwise there is a danger of that at failure there will be no regular operation of pillows or devices of a pyrotechnic tension of belts.



System of anti-blocking of brakes (ABS)


The control lamp watches ABS work.

ABS

Availability for service of the main electric ABS components is checked before the beginning and during movement by the electronic monitoring system.

The control lamp lights up at inclusion of ignition and should go out approximately in 2 seconds.

If the control lamp of ABS does not die away or lights up under way, the device is faulty. In this case car braking only with use of usual brake system is possible.

If at malfunction of ABS the alarm lamp of brake system in addition lights up, consider the following:
ATTENTION

With refusal of the regulating ABS function when braking back wheels can be blocked rather quickly. Under certain conditions it can lead to car drift.
In this case carefully move on the next to HUNDRED Audi and eliminate malfunction.



At failure of ABS cars with antiprobuksovochny system / the electronic program of stabilization of course stability also control lamp of ASR/ESP burns. For more detailed data address to subsections Switches and switches and Features of driving of the car and auxiliary systems (ABS, EDS, ASR, ESP).

Electronic blocking of differential (EDS) *

EDS works together with ABS.

At refusal of ABS EDS does not work also.

Hand brake


The control lamp lights up at tightened manual a brake and the included ignition. It should die away after an otpuskaniye of the hand brake.

Accumulator category


The control lamp lights up at inclusion of ignition and should go out after engine start.

If the lamp does not die away or lights up during car movement, as a rule still it is possible to reach to the next to HUNDRED Audi. As thus, however, there is a continuous category of the accumulator, it is necessary to switch off everything consumers of a current, except the most necessary.

On cars with information system of the driver there is still an additional lamp of control of tension of the accumulator.

Reminder about bypass pave пристегнуться*

The control lamp lights up for some seconds after ignition inclusion, reminding of need to fasten seat belts.

Alarm symbols (standard execution)


At inclusion of ignition and during movement of cars without information system of the driver (FIS) mentioned below functions and a technical condition of systems of the car are continuously supervised.

About arising malfunctions, or the system informs on need of urgent performance of repair and preventive works as a sound signal, accompanying it red and yellow light symbols on a control panel, depending on priority degree.

If under control functions as it should be, for some seconds are highlighted the letters "OK".

Symbols of red color (priority 1)

Malfunction of brake system
Falling of level of liquid in system of cooling is lower norms or its overheat
Pressure drop of oil is lower than norm

At emergence of a blinking red symbol three precautionary sound signals following one by one are distributed. Symbols signal about danger. Stop, muffle the engine, check the refused system and eliminate malfunction. Probably for this purpose the qualified help is required.

At emergence at once several refusals of the first degree of priority symbols appear consistently, with duration of indication of each of them 2 seconds. The blinking of symbols proceeds before malfunction elimination.

Yellow symbols (priority 2)

Reserve stock of fuel
Wear of brake shoes
Check level impellent масла*
Malfunction of a sensor of level of impellent oil

At emergence of a yellow symbol one warning signal is distributed. Indication of symbols – a prevention signal. As soon as possible check the corresponding functional indication. At simultaneous indication of several preventions symbols appear consistently, within about 2 seconds everyone.

The prevention about open a door / luggage carrier

 

At the included ignition the symbol of the digital display indicates open doors and a luggage carrier. Irrespective of an open door, the pictogram always shows an open door of the driver. The luggage carrier represented on the pictogram blinks at its open door.

After the correct closing of all doors and a luggage carrier this symbol dies away.

Brake system

 

The symbol blinks at too low level of brake liquid or at malfunction of ABS.

In this case stop, and check level of brake liquid.

When falling level of brake liquid in the refueling tank below “Min” mark carefully reach to the next to HUNDRED Audi, add brake liquid and establish the reason of decrease in its level. At refusal of ABS there is no regulation of brake effort of the back bridge. Therefore back wheels have big tendency to blocking.
ATTENTION

The reason of falling of level of brake liquid norms are lower and increases in a free wheeling of a brake pedal there can be a refusal of one of contours of a double-circuit hydraulic actuator of brakes.
In this case though it is possible to reach with care to the next to HUNDRED Audi, however on the road remember increase in a brake way and effort to a pedal.
At normal level of brake liquid the reason can consist in malfunction of ABS. With failure of the regulating ABS function when braking rather fast blocking of back wheels can take place. Under certain circumstances it can lead to drift of the back bridge of the car.
Carefully reach the next to HUNDRED Audi, and eliminate malfunction.



Temperature / level of cooling liquid


 

The symbol blinking under way testifies to an overheat of cooling liquid or falling of its level norms are lower.
Stop, muffle the engine and check liquid level. If necessary add liquid.
ATTENTION

Be careful when opening a stopper of a broad tank of system of cooling! The system of cooling of the heated-up engine is under pressure – danger of a burn at liquid emission! Therefore before unscrewing a stopper, let's to the engine cool down.
Do not hold up a hand under the fan!
If level of cooling liquid in norm, the reason of an overheat can be failure of the fan of system of cooling.



Do not continue movement if the lamp does not die away – use the qualified help.

Pressure of impellent oil

 

At a blinking of this alarm symbol muffle the engine, check level of oil and if necessary add

At a blinking of a symbol and normal level of oil it is impossible to continue movement. Operation of the engine idling is not allowed – use the qualified help.
ATTENTION

The alarm symbol of pressure of oil is not the index of its level in greasing system!
Therefore check oil level regularly, it is the best of all when filling.



Reserve stock of fuel

 

Urgently fill the car.

Wear of forward brake slips

 

Address on HUNDRED Audis for check of overlays of brake shoes of lobbies and, in addition, back wheels.

Check level impellent масла*

 

At emergence of this symbol as soon as possible check level of oil and add it

Malfunction of a sensor impellent масла*

 

Address on HUNDRED Audis for check of the sensor of level of oil.

Indication of external temperature (standard execution)

 

Indication of external temperature appears at the included ignition.

At temperatures from +5°С to – 5°С to the left of indication of temperature the snowflake is highlighted.

Emergence of a symbol in the form of a snowflake warns the driver about need of extra care in view of danger of ice.

On the motionless car or at movement with very small speed indication can be slightly higher than the actual temperature owing to heat radiated by the engine.

On cars with the conditioner, when switching display on indications by the Fahrenheit scale (F) respectively indication of external temperature automatically changes

Information system of the driver (FIS) *

Display

 

On the display of information system of the driver (FIS) the following indication can be deduced:

· The prevention about open a door / luggage carrier
· Radio frequency indication
· Indication of external temperature
· Monitoring system of malfunctions
· Alarm system of excess of speed
· Traveling computer
· Positions of the lever of the selector (automatic transmission) *
· System data навигации* (using system of navigation is considered in the enclosed operation manual).
ATTENTION

On cars with automatic transmission indication is deduced on the display only after inclusion of a mode of movement.



 

At a consecutive nazhimaniye the Reset keys (dumping) join the following modes:

– External temperature / traveling computer / monitoring system of malfunctions or
– System indication навигации*
– Display switching off

Display of faults of the monitoring system of malfunctions is highlighted also at the switched-off display.

Using navigation system Audi possibly only at the switched-on display.

Prevention of an open door / багажнике1)

 

At the included ignition the symbol of the digital display indicates open doors and a luggage carrier. As an example on an illustration the open door of the forward passenger, a back left door and a luggage carrier are shown. The luggage carrier represented on the pictogram blinks at its open door.

1) On cars with information system of the driver (FIS).

After complete closing of all doors and a luggage carrier this prevention dies away and on indication the corresponding functions of information system of the driver will be deduced.

Indication радиосистемы1)

In the absence of display of faults of the 2nd degree of priority and the included radio (depending on a radio complete set) after will go out the letters "OK", on the display there is a name of radio station or a radio frequency with additional information.

This indication is additional information of the radio display.

Indication external температуры1)

 

Indication of external temperature appears at the included ignition. On cars with automatic transmission indication appears only after inclusion of a mode of movement.

At temperatures from +5°С to – 5°С to the left of indication of temperature the snowflake is highlighted.

1) On cars with information system of the driver (FIS).

Emergence of a symbol in the form of a snowflake warns the driver about need of extra care in view of danger of ice.

On the motionless car or at movement with very small speed indication can be slightly higher than the actual temperature owing to heat radiated by the engine.

On cars with the conditioner, when switching display on indications by the Fahrenheit scale (°F) respectively indication of external temperature automatically changes

Monitoring system of malfunctions автомобиля1)

At the included ignition and during movement the system of automatic control of malfunctions continuously supervises certain functions and a technical condition of systems of the car.

About arising malfunctions, or the system informs on need of urgent performance of repair and preventive works as a sound signal, accompanying it red and yellow light symbols on a control panel, depending on a priority. Besides, as the help to the driver, along with some red symbols, on the display there can be an indication of instructions to the driver.

Indication of the following preventions and signals about refusals is possible:

1) On cars with information system of the driver (FIS).

Symbols of red color (priority 1)

 


Malfunction of brake system
Falling of level of liquid in system of cooling is lower norms or its overheat
Pressure drop of oil is lower than norm

At emergence of a blinking red symbol three precautionary sound signals following one by one are distributed. Symbols signal about danger. Stop, muffle the engine, check the refused system and eliminate malfunction. Probably, for this purpose the qualified help is required.

 

At emergence at once several refusals of the 1st degree of priority symbols appear consistently, with duration of indication of each of them 2 seconds. The blinking of symbols proceeds before malfunction elimination.
ATTENTION

In case of malfunction at the included system of navigation *, for some seconds on a place of indication of system of navigation there is an alarm symbol of the 1st degree. Then this symbol moves up in the field of indication of the 2nd degree of priority, and on its place again there is an indication of system of navigation.
In the presence of malfunction of the 1st degree of priority indication of the 2nd degree of priority is not deduced.



Yellow symbols (priority 2)

Malfunction of a signal торможения2)

BREMSLICHT
Peregoraniye of a lamp of a passing beam or backing
Falling is lower than norm of level of washing liquid
Reserve stock of fuel
Deviation of tension of the accumulator from norm
Check level impellent масла*
Malfunction of a sensor of level impellent масла*
Alarm system of excess of speed
Malfunction of dynamic regulation of a tilt angle фар*

2) Depending on the country – a symbol or an inscription.

At emergence of a yellow symbol one warning signal is distributed. Indication of symbols – a prevention signal. As soon as possible check the corresponding functional indication. At simultaneous indication of several preventions symbols appear consistently, within about 2 seconds everyone.

Control button

 

The control button has the following appointment:

Control of indication of symbols.

The short-term pressing of the control button, at the included ignition, makes a consecutive call on indication of all symbols. Check of work of system can be carried out both at muffled, and at the working engine and at speed no more than 5 km/h.

In the presence of malfunction of the 1st degree of priority (a red symbol) control of indication is impossible.

Conclusion to indication of instructions to the driver

At a blinking of any symbol of the 1st degree of priority, as the help to the driver on the display the corresponding instructions can be deduced.

For example: “MOTOR ABSTELLEN, OLSTAND PRUFEN” (muffle the engine, check oil level).
For highlighting press the control button. Indication dies away approximately in 5 seconds after a button otpuskaniye.

Illumination of the counter of the passable way

At the switched-off ignition press the control button – approximately within 15 seconds indication of the counter of the passable way is highlighted.

Check of work of system

 

After ignition inclusion the monitoring system of malfunctions of the car carries out automatic control of functions.

Cars with a manual box of gear shifting – RKPP

If checked by the monitoring system of malfunctions of function as it should be, for some seconds indication "OK" lights up.

In the presence of malfunctions, after inclusion of ignition there is their indication (instead of indication "OK"). The acoustic warning signal (is at the same time distributed at simultaneous emergence of malfunctions of 1 and 2 degrees of priority three warning signals).

At absence on the display of indication of malfunction, and also the letters "OK" the system is subject to check.

Cars with automatic transmission

After ignition inclusion (the selector lever in the situation "R" and "N") on the display appears the instruction to the driver: “BEIM EINLEGEN EINER FAHRSTUFE IM STAND FUSSBREMSE BETATIGEN” (at inclusion of a mode of movement of the motionless car press a brake pedal).

At a choice a movement mode (“R”, “D” etc. the instruction to the driver dies away, and after pressing of a pedal of a brake automatic control of functions is carried out.

If under control functions as it should be, for some seconds are highlighted the letters "OK".
In the presence of one or several malfunctions, approximately in 15 seconds after engine start, the instruction to the driver is replaced by indication of the corresponding symbols of malfunctions.

Display of faults

At violation of malfunctions of functions under control to the monitoring system the acoustic warning signal is distributed. Emergence of the following symbols is at the same time possible:

Brake system

 

The control lamp blinks when falling level of brake liquid below norm or at malfunction of ABS.
Stop and check level of brake liquid.
When falling level of brake liquid below a mark of "Min" it is possible to reach with care to the next to HUNDRED Audi for the purpose of a dolivaniye of liquid and clarification of the reasons of its leak. At refusal of ABS there is no regulation of brake effort of the back bridge. Therefore back wheels have big tendency to blocking.
ATTENTION

The reason of falling of level of liquid in the tank is lower than norm and simultaneous increase in a free wheeling of a brake pedal refusal of one of contours of a double-circuit hydraulic actuator of brakes can be.
In this case though it is possible to reach with care to the next to HUNDRED Audi, however on the road remember increase in a brake way and effort to a pedal.
At normal level of brake liquid the reason can consist in malfunction of ABS. With failure of the regulating ABS function when braking rather fast blocking of back wheels can take place. Under certain circumstances it can lead to drift of the back bridge of the car.


Carefully reach the next to HUNDRED Audi, and eliminate malfunction.

Temperature / level of cooling liquid

 

The overheat or falling of level of cooling liquid can be the reason of a blinking of a lamp during movement.
Stop, muffle the engine, check level of cooling liquid and if necessary add it.
ATTENTION

Be careful, opening a stopper of a broad tank of system of cooling! The system of cooling of the heated-up engine is under pressure – danger of a burn at liquid emission! Therefore before unscrewing a stopper, let's to the engine cool down.



Do not hold up a hand under the fan!

If level of cooling liquid in norm, the reason of an overheat can be failure of the fan of system of cooling.

If the control lamp does not die away, it is impossible to continue movement. Use the qualified help.

Pressure of impellent oil

 

At a blinking of this symbol stop, muffle the engine, check level of oil and if necessary add it

It is impossible to continue movement if the symbol blinks at normal level of oil. Do not allow operation of the engine idling – use the qualified help.
ATTENTION

The control lamp of pressure of oil is not the index of its level in greasing system!
Therefore check oil level regularly, it is the best of all at each filling.



BREMSLICHT or


At inscription or symbol fire to check and if necessary replacement, or to repair on HUNDRED Audis are subject:

– lamps of stoplights,
– safety locks,
– connections in electroconducting,
– the switch of a signal of braking (only at complaints during function control).

Peregoraniye of a lamp of a passing beam or lamp of a lamp of a backing

 

Malfunction can be caused by the following reasons:

– fused lamps
– safety locks and
– connections in electroconducting are broken.

Replace independently or with HUNDRED Audis faulty lamps / safety locks.

Function control “peregorany lamps of a passing beam or a lamp of a lamp of a backing“ is carried out only at included light.

Washing liquid

 

Add washing liquid in the tank glass – and фароомывателя*

Fuel reserve

 

Urgently fill the car.

Deviation of tension of the accumulator from norm

 

Address on HUNDRED Audis and check a tension of a maple belt, an accumulator regulator / condition.

Control lamp of the category of the accumulator

Check level impellent масла*

 

At emergence of this symbol as soon as possible check level of oil and add it

Malfunction of a sensor of level impellent масла*

 

Address on HUNDRED Audis for check of the sensor of level of oil.

Malfunction of dynamic regulation of a tilt angle фар*

 

Address on HUNDRED Audis for repair of a regulator of a tilt angle of headlights.

Excess alarm system скорости1)

 

The alarm system of excess of speed allows to establish its limit at which excess approximately on 10 km/h, the warning signal is distributed. At the same time on the display there is an alarm km/h symbol.
ATTENTION

Irrespective of existence of the device of the alarm system of excess of speed, supervise admissible traffic regulations the maximum speed on a speedometer.



1) On cars with information system of the driver (FIS).

Below process of programming of speed of degrees of the prevention 1 and 2 and their cancellations is described.

Degree of the prevention 1

 

The alarm symbol dies away at reduction of speed below the programmed threshold. The symbol dies away besides at increase of speed approximately on 40 km/h above the programmed threshold within at least 10 seconds. Thus however there is no dumping of data of memory of the programmed restriction of speed.

Programming of speed

At the moment of indication on a speedometer of the necessary speed press and release the control button of the monitoring system of malfunctions. Input in memory proves to be true in highlighting of an alarm symbol of restriction of speed at a button otpuskaniye.

The programmed value of speed remains in memory to the following pressing of the button at other speed or dumping of data of a memory.

Cancellation of the entered restriction of speed

 

At speed more than 5 km/h press the control button more than one second. Cancellation of restriction proves to be true the crossed-out alarm symbol.

At switching off of ignition there is an automatic dumping of data of memory of a memory.

Degree of the prevention 2

 

At the switched-off ignition the driver can program a continuous threshold of the prevention.

Indication of the prevention is highlighted on the display. The alarm symbol dies away unlike prevention degree only at decrease in speed below the programmed size.

Programming of this prevention is recommended in need of a reminder to the driver of maintenance of a certain speed as addition to degree of the prevention 1. (For example, at movement in the country with restriction of speed, the maximum speed at movement with winter tires etc.).

Programming of speed

At the switched-off ignition press and release the control button. Indication of the counter of the passable way is highlighted.

Again press a minimum for 2 seconds the control button. On the display there is a size of an actual threshold of restriction of speed.

 

For change of speed press the top or bottom party of the switch of functions (shooter) of the traveling computer. Thus occurs stage-by-stage (one stage of 10 km/h) increase or reduction of values.

In some seconds after completion of programming illumination of the display is again switched off.

The programmed value of speed remains in memory to the following pressing of the button at other speed or dumping of data of a memory.

Cancellation of the entered restriction of speed

At the switched-off ignition press and release the control button. Illumination of the display joins. Again press approximately for 2 seconds the control button – there is an indication of the established speed. In end press and hold the Reset key of the traveling computer before emergence of the crossed-out alarm symbol.