Audi A3

since 1997 of release

Repair and car operation



Audi A3
- Maintenance instruction
   Audi A3/S3 brand cars - the summary
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and workplace equipment
   Poddomkrachivaniye and towage
   Engine start from the auxiliary power supply
   Checks of readiness of the car to operation
   Automobile himikaliya
   Diagnostics of malfunctions of knots and car systems
   Governing bodies and receptions of safe operation
   Arrangement of governing bodies and devices
   Keys, body locks with uniform management and the security alarm system
   Electric window regulators and rear-view mirrors
   Safety systems. Transportation of children
   Seats
   Luggage carrier
   Adjustable steering column
   Hand brake
   Automatic transmission
   The device of the acoustic help at a parking
   Lock of ignition and engine start
   Control and measuring devices. Precautionary and diagnostic systems
   Traveling computer
   Switches and switches
   Tempostat
   Screen wipers and stekloomyvatel
   Ventilation, heater and conditioner of air of salon
   Elevating and movable panel крыши*
   Illumination of salon and luggage carrier
   Salon equipment
   Luggage carrier on a roof
   Running in
   Features of driving of the car and auxiliary systems (ABS, EDS, ASR, ESP)
   Trailer operation
   Fuelling and emergency unlocking of a cover of the refueling hatch
   Cowl
   Readjustment of headlights
   First-aid kit
   Sign of an emergency stop
   Set of the tool and jack
   Spare wheel
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Elektroskhema


38a8de3e

Traveling computer

GENERAL INFORMATION

Governing bodies


The switch of functions (And) and a key of dumping (“Reset”) (In) are mounted in the handle of management by a screen wiper.

At the included ignition and repeated pressing the top / bottom party of the switch of functions (And) they are consistently deduced on indication.

Besides, the switch of functions establishes degree of the prevention of 2 alarm systems of excess of speed.

1) On cars with information system of the driver (FIS).

In pressing of a key of dumping (Reset) (at least 1 second) it is possible to null the values kept in memory “time of movement, average fuel consumption and average speed”. Besides, it is possible to interrupt with short-term pressing of a key the alarm computer indication warning about excess of norm of time of continuous stay at a wheel.

If necessary in pressing of a key of dumping it is possible to switch off and turn on the digital display of a control panel.

At ignition inclusion on indication the last is deduced at the moment of ignition switching off function.

At a detachment of plugs of the accumulator all saved-up values are erased.

Display

The traveling computer issues the following information:

· current fuel consumption
· a course stock on fuel
· time of continuous stay at a wheel
· average fuel consumption
· average speed of movement

l/100 km current fuel consumption

On indication values of the current fuel consumption measured in l/100 of km are deduced.

The expense is calculated on each 30-meter site of a way. During a stop of the car indication of last of the calculated values remains.

If after start of the engine function of definition of the current fuel consumption is caused, on the first 30–40 meters of a way on indication its average value is deduced.

By means of this indication it is possible to choose the mode of movement corresponding to optimum fuel consumption.

km a course stock on fuel

The course stock is determined by fuel by the discrete values counted by steps on 10 km. This indication shows, how many kilometers the car can pass on the actual rest of fuel in this mode of movement.

Fuel consumption is accepted to a basis of calculations of a stock of a course on the last 30 km of a way. At more economic subsequent movement the stock of a course increases.

h time in a way

On indication time in a way with counting from the moment of the last dumping of data of memory is deduced. At the switched-off ignition value of time in a way remains. At movement continuation to it the subsequent counting of time is added.
The limit of indications of time in a way makes 23 hours and 59 minutes.

At desire to reckon time in a way since a certain moment clear memory in Reset key pressing.

Reminder on need of a break in movement

In two hours after a start of motion, irrespective of the programmed function there is an automatic switching on time indication in a way. Blinking indication of a look “2:00” reminds the driver of need to make a break in movement.

In short-term pressing the top or bottom party of the switch of functions, or the Reset key this indication can be switched off. If ignition remains included or if a break will make less than 10 minutes, in each next two hours the reminder on need will stop on rest to repeat with time indication in a way of a look 4:00, 6:00 etc.
At duration of a break more than 10 minutes to the switched-off ignition there is a dumping of data of counting of time in a way.

l/100 km Average fuel consumption

On indication average fuel consumption is deduced from the moment of the last dumping of data of memory of a memory. Do not confuse it to the current fuel consumption.

At the switched-off ignition value of average fuel consumption remains in memory. At continuation of movement data of the subsequent expense are considered.

For dumping of data of memory press the Reset key. At journey of the first 30 m after dumping on indication zero value is deduced.

km/h – average speed of movement

On indication average speed of movement is deduced from the moment of the last dumping of data of memory. At the switched-off ignition this size remains in memory. At continuation of movement data of the subsequent run are considered.

For dumping of data of memory press the Reset key.

Indicators of fuel consumption, course stock on fuel and speed are displayed in metric, and in certain export options in English system of units (km l/100 – mpg, km – mi, km/h – mph).

On an illustration as an example indication of the current fuel consumption is shown.