since 1997 of release
Repair and car operation
- Maintenance instruction
Audi A3/S3 brand cars - the summary
Identification numbers of the car
Acquisition of spare parts
Technology of service, tool and workplace equipment
Poddomkrachivaniye and towage
Engine start from the auxiliary power supply
Checks of readiness of the car to operation
Diagnostics of malfunctions of knots and car systems
Governing bodies and receptions of safe operation
Arrangement of governing bodies and devices
Keys, body locks with uniform management and the security alarm system
Electric window regulators and rear-view mirrors
Safety systems. Transportation of children
Adjustable steering column
The device of the acoustic help at a parking
Lock of ignition and engine start
Control and measuring devices. Precautionary and diagnostic systems
Switches and switches
Screen wipers and stekloomyvatel
Ventilation, heater and conditioner of air of salon
Elevating and movable panel крыши*
Illumination of salon and luggage carrier
Luggage carrier on a roof
Features of driving of the car and auxiliary systems (ABS, EDS, ASR, ESP)
Fuelling and emergency unlocking of a cover of the refueling hatch
Readjustment of headlights
Sign of an emergency stop
Set of the tool and jack
+ Current leaving and service
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
In interests of preservation of good dynamics of the car watch uniform distribution of cargo.
Heavy subjects place as it is possible further ahead, i.e. closely to backs of back seats or closely to forward seats (address to an illustration) at put backs. Cargo should not support the upper edge of backs of seats.
Pressure in tires should correspond to car loading – address to a pressure sticker in tires on a cover of the refueling hatch.
At all do not exceed full admissible weight and axial loading. Their admissible values are given in car documents.
In a luggage compartment four lifting loops (arrows) are located.
By means of these loops it is possible to fix cargo.
The safety grid is in a luggage carrier pocket. By means of a grid it is possible to fix luggage carrier cargo reliably.
Enter grid hooks into lifting loops.
After use combine a grid and lay it in a pocket.
For installation and fixing of forward hooks enter hooks parallel to a loop, and then turn them – address to an illustration.
Straighten in a luggage carrier a safety grid. Thus the inscription of "TORAHS" should indicate up, and an arrow in the movement direction. The free end of a lifting belt should indicate in the direction of a door of a luggage carrier.
Combine up both regulators and weaken lifting belts – address to an illustration.
Place cargo that it whenever possible completely was under a grid.
Pull back lifting belts and achieve their hard tension.
Cargo holding grid
This grid can be used only for fastening of easy cargo.
The grid interferes with shift of cargo of a luggage carrier. For fastening of cargo pass hooks in lifting loops.
Bed curtains of a luggage compartment
The bed curtains of a luggage compartment can be used for clothes subjects.
Besides, subjects rubbing about back glass can damage system of its electroheating.
When opening a door of a luggage carrier the bed curtains of a luggage compartment at the same time rise.
In need of transportation of bulky cargoes the bed curtains can be removed.
Bed curtains removal
In bed curtains junctions in a door of a luggage carrier liberate lock loops (1).
Pull bed curtains (3) back and take it from holders (2) – shooters.
For installation of bed curtains enter it forward in lateral holders and fix lock loops on a luggage carrier door.