Removal and installation of facing of a door of a back
REMOVAL OF THE BOTTOM FACING
| PERFORMANCE ORDER |
| 1. Open a cover. |
| 2. Turn out 2 screws of fastening–1–of handle facing. | | 3. Disconnect by means of a screw-driver facing–2–. | | 4. Remove facing. | | INSTALLATION
| PERFORMANCE ORDER |
| 1. Establish facing–2–and fix it. | | 2. Screw screws-1-in handle facing. | | REMOVAL OF THE TOP FACING
| PERFORMANCE ORDER |
| 1. Remove facing below–2–. |
| 2. Disconnect facing–3–by means of a screw-driver at the left, on the right and above. | | 3. Remove facing. | | INSTALLATION
| PERFORMANCE ORDER |
| 1. Establish into place facing–3–and fix it at the left, on the right and above. | | 2. Establish facing below–2–. | |
|