| 1. Establish the central console. |
| 2. Attach according to an illustration shtekerny connections. |
| 3. Establish the central console into position. |
| 4. Tighten screws-2 – the moment of 4 N • m. |
5. Tighten screws-4 – the moment of 4 N • m, do not forget about brackets.
ATTENTION At installation of the central console spring brackets–1–above should stand vertically, below horizontally.
|
| 6. Establish the shelf from the driver, address to the subsection Removal and pocket installation from the driver. |
| 7. Establish a ware box, address to the subsection Removal and installation of a ware box. |
| 8. Establish a peak–4–and press it. The peak should be fixed. |
| 9. Tighten screws-1-the small moment of 1.2 N • m. |
| 10. Establish a radio receiver, address to the subsection Removal, installation and radio receiver coding. |
|
11. Establish an ashtray in front and enter the rubber holder–2–into the dashboard. |
| 12. Join the socket of the lighter and ashtray illumination. |
| 13. Tighten screws-1-the small moment of 1.2 N • m. |
