Connection of a crossing point of conducting of a safety cushion
After its removal, it is necessary to keep a chain of weight of a safety cushion closed until the seat again will not be established and attached. For this purpose attach VAS 5094 crossing point.
ATTENTION
To exclude inadvertent firing of a lateral safety cushion by the electrostatic category, it is necessary to remove a charge. For this purpose it is necessary to concern a lock or body latch.
|
PERFORMANCE ORDER |
| 1. Rasstykuyte a screw-driver–4–stopper–2–tips-1-of a lateral pillow and расстыкуйте I will corrode in the arrow-3-direction. | | 2. If connection does not undock, press a finger – 5–stopper of the tip aside and pull forward all connection. Then расстыкуйте connection as it was described above. | | 3. Insert the tip-2-of an adapter of VAS 5094 into the case-3-. | | 4. Connect a wire of ignition of-6-pillows to the tip – 1–adapters. |
|
|
