| 1. Pass a new cable from within via the plug-2-in an impellent compartment. |
| 2. Connect a cable to the handle of a drive and fix two screws around feet of the driver. |
| 3. Connect a cable to the cowl lock. |
| 4. Lay a cable, as is shown in an illustration. |
| 5. Connect a cable to a lock drive. |
| 6. Fix a drive of the lock of a cowl–1–samorezy – 4–. |
| 7. Fix a cable clips–8–and–9–, under a wing. |
| 8. Establish clips–7–on the holder of the lock. |
