1. Previously the door should be adjusted by a zamkovy element. |
2. Remove door facing, address to the subsection Removal and installation of facing of a door. |
3. Level a door in the longitudinal direction by shift of an adjusting wedge–4–, previously having weakened a bolt–3–(address to an illustration the Forward door in the subsection Removal and installation of a forward door and the holder of adjusting elements). |
4. By shift of an adjusting wedge–7–at a little weakened bolt–6–(address to an illustration the Forward door in the subsection Removal and installation of a forward door and the holder of adjusting elements) changes an inclination of the holder in relation to a rack of Century. |
5. Adjust the holder so that to reach the correct gaps and to receive a uniform gap in relation to adjacent elements of a body. Sizes of gaps are specified in Specifications. |
| 6. Watch that working edges of consolidation–2–evenly adjoined to a rack And and a roof frame. Thus the holder–1–pull a little more than it is required for counteraction to return of rubber consolidation. 3–door window. |
7. Tighten bolts–3–and–6–(address to an illustration the Forward door in the subsection Removal and installation of a forward door and the holder of adjusting elements) the moment of 30 N • m. |
8. Establish a door covering, address to the subsection Removal and installation of facing of a door. |