| 1. Move the lever of switching of speeds or the selector to back situation. |
| 2. Establish the central console from above. |
| 3. Put on a casing of the lever of switching of speeds or the selector a bar and fix a new collar. |
| 4. If necessary establish an armrest, address to the subsection Removal and armrest installation. |
| 5. Fix the diagnostic tip. |
| 6. Release the parking brake. |
| 7. Screw 4 screws-5-. Forward tighten the moment of 1.5 N • m, back the moment of 4 N • m. |
| 8. Insert 4 covers–4–. |
| 9. Insert a cover in front of the parking brake – 2–. |
| 10. Screw screws-3-and tighten the moment of 4 N • m. |
| 11. Insert an ashtray. |
