Audi A3

since 1997 of release

Repair and car operation



Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures
   Care of a body
   Care of the panels of furnish made of vinyl
   Care of an upholstery and salon rugs
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Removal and installation of a vnutrisalonny mirror
   Removal and armrest installation
   Removal and installation of the bottom central console
   Removal and installation of the diagnostic tip of systems of safety
   Removal and installation of the central console
   Removal and installation of facing are resistant And
   Removal and pocket installation from the driver
   Removal and installation of a ware box
   Removal and installation of back lateral facing
   Removal and installation of facing of a back part of a roof
   Removal and installation of a level of a threshold
   Removal and installation of facing of a door of a back
   Removal and installation of facing of a luggage carrier
   Removal and installation of facing of the lock of a trunk lid
   Removal and installation of a forward seat
   Removal and installation of a cover of a forward seat
   Removal and installation of a cover directing seats from a channel
   Removal and installation of a cover directing seats from the tunnel
   Connection of a crossing point of conducting of a safety cushion
   Removal and installation of a back seat and back
   Removal and installation of the panel of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation covered
   Removal and installation of an internal slip covered
   Removal and installation of loker of an arch of forward and back wheels
   Removal and installation of a cable of a drive of the lock of a cowl
   Removal and installation of the lock of a cowl
   Removal and installation of a hook of a cowl
   Removal, installation and cowl adjustment
   Cowl consolidations
   Removal and installation of a door of a back
   Removal and installation of a loop of a door of a back
   Adjustment of a door of a back
   Removal and installation of a sealant of a door of a back
   Removal and installation of the lock of a door of a back
   Removal and installation of the locking mechanism
   Removal and installation of a maple element of the lock of a door of a back
   Removal and installation of a level of the handle of a door of a back
   Removal and installation of facing of a door
   Isolation of a covering of a door
   Adjustment of the button of an unblocking
   Removal and installation of a forward door and holder of adjusting elements
   Door adjustment
   Removal and installation of a window regulator and glass of a window of a door
   Removal and installation of the electric motor of a window regulator
   Removal and installation of the handle of a forward door and lock cylinder
   Removal and installation of a beam of adjusting elements and loops of a back door
   Removal and installation of a guard and beam lateral amplifiers/levels of mine of a window
   Installation of a lateral safety cushion
   Installation of a lateral safety cushion in a beam of adjusting elements
   Removal and installation of an external mirror and mirror glass
   Removal and installation of a slip are resistant In
   Removal and installation of a lateral molding
   Removal and installation of an overlay of a door and wing
   The uniform lock - general information and vacuum hoses
   Removal and installation of activators of the uniform lock
   Emergency unblocking of a cover of the hatch of a fuel tank
   Removal and installation of the pump of the uniform lock
   Replacement of elastic bands of brushes of screen wipers
   Adjustment snuffled a stekloomyvatel
   Removal and installation snuffled a windscreen washer
   Removal and installation, check and adjustment of final position of levers of a screen wiper
+ Onboard electric equipment
+ Elektroskhema


38a8de3e

Removal, installation and cowl adjustment

GENERAL INFORMATION

Elements of fastening and cowl adjustment

1–cowl
2–buffer
For adjustment of height of a cowl.
3–gas-filled emphasis
4–spring
5–cowl loop
6–bolt, 20 N • m
7–noise exhaust silencer
Only for the diesel engine.
8–nut, 8 N • m
9–hook

REMOVAL

PERFORMANCE ORDER
1. Open a cowl.
2. Mark the provision of a cowl. For this purpose lead round a felt-tip pen fastening bolts on loops (from a cowl).
3. Ask the assistant to support a cowl.
ATTENTION

At removal of a gas-filled emphasis it is impossible to remove completely a lock spring–4–. Otherwise the emphasis can be damaged and it is necessary to replace it.


4. Disconnect a gas-filled emphasis–3–from a cowl. For this purpose raise a screw-driver a lock spring–4–a little. Remove an emphasis from a spherical support. If the emphasis is necessary for removing completely, raise the bottom spring the same as top and remove the sharovy hinge.
5. Turn out bolts of fastening–6–on a cowl and remove a cowl by means of the assistant.

INSTALLATION

PERFORMANCE ORDER
1. If necessary restore a paint and varnish covering of a cowl.
2. Establish into place a cowl. Expose a cowl by means of the markings put at removal, and fix bolts–6–. If the new cowl is established, it is necessary for adjusting.
3. Put an emphasis–3–on a spherical support and fix a spring–4–.
4. If shock-absorbers-2-acted in film, they are necessary for adjusting again. External shock-absorbers turn for adjustment on height. Internal shock-absorbers screw completely and then turn on on Ѕ a turn. The cowl should settle down aflush with adjacent details of a body.

Cowl adjustment

PERFORMANCE ORDER
1. Weaken bolts of fastening–6–from a cowl a little so that it could be moved in the longitudinal and cross-section directions.
2. Unscrew nuts of fastening of a hook (a nut–1–, a hook–2–) a little.
3. Unscrew bolts of fastening of the lock of a cowl (screws-1-, the lock of a cowl–2–, the holder–3–) a little.
4. Close a cowl and displace it so that between adjacent elements of a body there was a uniform gap, address to Specifications.
5. Adjust the provision of a cowl on height by turn of external shock-absorbers-2-.
6. Carefully open the exposed cowl so that not to change the provision of loops of a cowl.
7. Tighten bolts of fastening of loops the moment of 20 N • m.
8. Tighten bolts of fastening of the lock of a cowl the moment of 20 N • m.
9. Tighten nuts of fastening of a hook the moment of 8 N • m.