Audi A3

since 1997 of release

Repair and car operation



Audi A3
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ the Power supply system and production of the fulfilled gases
+ engine Electric equipment
+ Manual box of gear shifting
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures
   Care of a body
   Care of the panels of furnish made of vinyl
   Care of an upholstery and salon rugs
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Removal and installation of a vnutrisalonny mirror
   Removal and armrest installation
   Removal and installation of the bottom central console
   Removal and installation of the diagnostic tip of systems of safety
   Removal and installation of the central console
   Removal and installation of facing are resistant And
   Removal and pocket installation from the driver
   Removal and installation of a ware box
   Removal and installation of back lateral facing
   Removal and installation of facing of a back part of a roof
   Removal and installation of a level of a threshold
   Removal and installation of facing of a door of a back
   Removal and installation of facing of a luggage carrier
   Removal and installation of facing of the lock of a trunk lid
   Removal and installation of a forward seat
   Removal and installation of a cover of a forward seat
   Removal and installation of a cover directing seats from a channel
   Removal and installation of a cover directing seats from the tunnel
   Connection of a crossing point of conducting of a safety cushion
   Removal and installation of a back seat and back
   Removal and installation of the panel of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation covered
   Removal and installation of an internal slip covered
   Removal and installation of loker of an arch of forward and back wheels
   Removal and installation of a cable of a drive of the lock of a cowl
   Removal and installation of the lock of a cowl
   Removal and installation of a hook of a cowl
   Removal, installation and cowl adjustment
   Cowl consolidations
   Removal and installation of a door of a back
   Removal and installation of a loop of a door of a back
   Adjustment of a door of a back
   Removal and installation of a sealant of a door of a back
   Removal and installation of the lock of a door of a back
   Removal and installation of the locking mechanism
   Removal and installation of a maple element of the lock of a door of a back
   Removal and installation of a level of the handle of a door of a back
   Removal and installation of facing of a door
   Isolation of a covering of a door
   Adjustment of the button of an unblocking
   Removal and installation of a forward door and holder of adjusting elements
   Door adjustment
   Removal and installation of a window regulator and glass of a window of a door
   Removal and installation of the electric motor of a window regulator
   Removal and installation of the handle of a forward door and lock cylinder
   Removal and installation of a beam of adjusting elements and loops of a back door
   Removal and installation of a guard and beam lateral amplifiers/levels of mine of a window
   Installation of a lateral safety cushion
   Installation of a lateral safety cushion in a beam of adjusting elements
   Removal and installation of an external mirror and mirror glass
   Removal and installation of a slip are resistant In
   Removal and installation of a lateral molding
   Removal and installation of an overlay of a door and wing
   The uniform lock - general information and vacuum hoses
   Removal and installation of activators of the uniform lock
   Emergency unblocking of a cover of the hatch of a fuel tank
   Removal and installation of the pump of the uniform lock
   Replacement of elastic bands of brushes of screen wipers
   Adjustment snuffled a stekloomyvatel
   Removal and installation snuffled a windscreen washer
   Removal and installation, check and adjustment of final position of levers of a screen wiper
+ Onboard electric equipment
+ Elektroskhema







Removal and installation of loker of an arch of forward and back wheels

GENERAL INFORMATION

Fastening of a loker of an arch of a back wheel

1–loker of an arch of a wheel
2–Torx screw, 2 N • m
3–nut nasechny
4–channel cover
5–a directing element

Loker of an arch переднго wheels

REMOVAL

PERFORMANCE ORDER
1. Remove a forward wheel.
ATTENTION

Operation of lifting and car installation on supports is connected with danger! Therefore before carrying out operation familiarize with car Poddomkrachivaniye's subsection.


2. Mark paint the provision of a forward wheel concerning a nave. It will allow to establish at assembly an otbalansirovanny wheel in its former situation. Weaken bolts of fastening of a wheel at the car standing on the earth. Lift a forward part of the car, put it on supports and remove a forward wheel.
3. Turn out Torx screws.
4. Compress a loker a little and take out from a wheel arch.
5. Fix a loker (arrow) Torx screws.
6. Establish into place a forward wheel so that the markings put at removal coincided. Previously grease with a thin layer of bearing greasing aligning belt of a disk of a wheel on a nave. Bolts of fastening of a wheel do not grease. Rusty bolts replace. Wrap bolts. Lower the car on wheels and tighten bolts cross-wise the moment of 120 N • m.

Loker of an arch of a back wheel

REMOVAL

PERFORMANCE ORDER
1. Remove a back wheel.
ATTENTION

Operation of lifting and car installation on supports is connected with danger! Therefore before carrying out operation familiarize with car Poddomkrachivaniye's subsection.


2. Mark paint the provision of a back wheel concerning a nave. It will allow to establish at assembly an otbalansirovanny wheel in its former situation. Weaken bolts of fastening of a wheel at the car standing on the earth. Lift a back part of the car, put it on supports and remove a back wheel.
3. Turn out Torx-2-screws (shooters).
4. Compress a loker–1–a little and take out from a wheel arch.

INSTALLATION

PERFORMANCE ORDER
1. Compress a loker–1–a little and insert into a wheel arch.
2. Fix a loker (arrow) Torx-2-screws.
3. становите into place a back wheel so that the markings put at removal coincided. Previously grease with a thin layer of bearing greasing aligning belt of a disk of a wheel on a nave. Bolts of fastening of a wheel do not grease. Rusty bolts replace. Wrap bolts. Lower the car on wheels and tighten bolts cross-wise the moment of 120 N • m.